Zeiss DTI 4/50 Thermal Imaging Monocular 

Nature never sleeps. And the passion for observing it doesn’t rest either.

Although experienced birders already have a wealth of knowledge, for absolute certainty, the right equipment is crucial. The ZEISS DTI 4 is a thermal imaging camera that always performs at its best. With its compact size, a high-resolution 640 × 512 sensor and ZSIP, it delivers high-contrast, detailed image quality anywhere – even over long distances.

In rural areas, the range of observation becomes important, the ZEISS DTI 4/50 is the perfect choice thanks to its tremendous detection range. Detect heat sources clearly and with high contrast at distances of up to 2,635 meters and identify even the smallest details in sharp image quality thanks to ZSIP.

High detail recognition with 640 x 512 px Sensor

The new 640 x 512 sensor offers higher image resolution for better image quality at all zoom levels, as well as a longer detection range with less noise at the same zoom level compared to a smaller sensor. As a result, it offers more detail detection at greater distances.

Smart Standby for Extended Battery Life

When out in the nature, the nearest power source is often far away. You usually need a portable charger to make sure your device doesn’t run out of power – which means extra weight and equipment to keep in mind. With an impressively long battery life of 7 hours, the DTI 4 models will hold enough charge for two to four birding trips. Extend the battery life even further by activating the smart standby function.

Three observation modes for every situation

Different environmental situations require a different device setting. The DTI 4 has three pre-programmed observation modes: universal, detect and fog. Detection mode, for example, highlights heat sources even more while reducing the cold background. This allows you to see animals behind trees and bushes better than before.

Unique Movement Alert

The Movement Alert tracks the hottest heat source in the image and notifies the user when that heat source moves. The LED on the top of the unit will start flashing or optionally the display will turn on. It is thus possible to monitor a large area without holding the camera all the time.