Sirui

Carbon fibre tripod with Ball Head - Delivers versatility and portability .  Easy transport - Legs fold 180° for compact storage.  Integrated monopod - Allows for quick setup in mobile situations.  Carbon fibre construction - Lightweight yet durable build.  Centre column - Can be reversed for ultra-low shots.  360° panning ball head enables smooth panoramic shots.  

Sturdy and reliable - The 8 layer carbon fibre tripod features a waterproof design, helping you to be protected from the elements.  Wide height range - It features 4 leg sections and a maximum height of 158cm, and reversing the centre column and will allow for ground level shots.  Retractable spikes - Rubber tripod feet with retractable spikes are designed to enhance the stability and can adapt to various shooting environments.  Impressive payloads - Thanks to the four section carbon fibre legs, this comes in at 1.2kg and can withstand up to 12kg of weight, while the VA-5 can take up to 3kg.  Dual safety lock - The VA-5 head dual lock system prevents the plate from slipping off head.  Easy alignment - Two bubble levels, one at the base of the head and one at the top, make it easy for you get a level shot.  

Extremely low weight and a very compact design - Easy to handle in any situation .  S grade design - Ergonomically curved legs gives the user a pleasant service.  Integrated monopod - Allows for quick setup in mobile situations.  Easy transport - Legs fold 180° for compact storage.  10 layer carbon fibre legs in 5 sections - 4 sealed twist locks.  Precisely and smooth ball head - Ideal for panoramic shots.  End of line - available while stocks last

End of line - available while stocks last

Sirui RX-75B Levelling Ball Set Use the Sirui 75mm Leveling Ball Set to give you the leveling advantages of a ball based video head while staying within the Sirui R-X tripod system. When the R-X bowl adapter is attached to the tripod in place of a flat mount, the 75mm Leveling Ball secures and levels your flat base tripod head.

Video tilt head VH-15 - The video giant for the big cinema.  Maximum load capacity of up to 10kg - This fluid video tilt head was designed for DSLRs, Mirrorless cameras and video cameras.  Rotation is infinitely variable and fixable - Can be operated and guided intuitively.  Sophisticated fluid system - Smooooth jerk free movements.  Tilt and rotate function - Can be fixed.  Doesn’t matter if you’re a southpaw - Swivel arm can be mounted left and right (without tools).  

Titan - With 40mm, 10-layer carbon legs, the R-5214X is one of Sirui's largest tripods.  Made to be tough - The carbon and CNC'd aluminium design can withstand up to 30kg of load.  Wide height range - Get down as low as 10cm, all the way up to 200cm.  Fast setup - Twist leg locks offer a fast and simple way to set up the tripod.  0% Finance

Professional quality - Thanks to the 10 layer carbon fibre legs, the BCT-2203 is strong and rigid, perfect for daily use.  Widely compatible - The integrated 75mm allows a huge range of video heads to be used with it.  Short and tall - Get as low as 43.5cm and as tall as 160cm, all with the easy to grasp oversized leg locks.  Impressive payload - The BCT-2203 can handle professional sized video rigs up to 10kg.  Spreaders included - The ground spreader has a rubber underside for safer and more secure placement on flat surfaces.  Extra grip - Thanks to the dual foot design, you can easily access the spiked feet at a flick of a switch.  

Carbon fibre tripod - Both portability and stability.  Easy transport - Legs fold 180° for compact storage.  Two centre columns - Versatile height adjustment for high and low angle shots.  Integrated monopod - Allows for quick setup in mobile situations.  Stability on any surface - Rubber feet and metal spikes .  Accurate and smooth ball head - Locking knob is coated with a rubber grip for easy operation.  End of line - available while stocks last

Aluminium broadcast tripod with fluid head - Designed for professional videography.  Lightness combined with stability - Video head and can carry cameras weighing up to 10 kg.  Freely movable leg angles without locking steps - Removable spikes or rubber feet for a firm hold.  Fluid system - Ensures smooth, jerk free movements.  Tilt and swivel function can be fixed - Safety Lock System prevents the plate from slipping.  Double tube legs with large twist locks - Tripod spider for additional stability.  

Ultra compact carbon fibre tripod - Designed to meet the needs of todays travel photographers.  The arched legs - For improved load distribution to the individual legs for greater stability.  The two stage centre column - Can be removed to improve the minimum working height for low level shooting.  Twist lock legs - Super quick and simple way to setup and close the tripod.  End of line - available while stocks last

Precision - The K-10X is a highly accurate and smooth ball head.  Strong - With a payload of 20kg, you camera will be safe and secure!.  Ergonomic - The locking knob is coated with a rubber grip for easy operation, even wearing thick gloves.  Arca Swiss - Compatible with the Arca Swiss System and allows the use of various compatible plates.  

Unique locking mechanism - Guaranteed precision and safety.  Separate control knobs - For panning and locking.  Bubble level - Makes horizontal adjustments quick and easy.  Quick release mount plate - Can rotate 90° for right or left hand operation.  90° / +90° tilt adjustment - Locking 360° rotating base.  Arca-compatible Quick Release plate - Anodized aluminium with rubber non slip surface .  

Sirui PH-120 Specific plate for PH-20 The Sirui PH-120 is an Arca-compatible quick release plate designed to use with telephoto lenses.The plate has a ridge at the rear of the plate that helps keep the lens from turning if only one mounting screw is used. Four anti-slide mats on the surface help keep the lens in place while installing the plate. It uses a dual mounting screw design to properly secure...

Sirui TY-50X Quick Release PlateThis SIRUI TY-50X quick release plate has a 1/4 standard thread for cameras and a rubber surface to prevent accidental slippage. The plate is compatible with the Arca Swiss system.The release plate has three slots, each of which can accept the 1/4 inch screw. The 1/4 inch screw can be secured with a coin or with the supplied Allen key. The plate also has a slot for attaching...

Sirui TY-70-2 Quick Release Plate 70x60mmThis SIRUI quick release plate has a 1/4 standard thread screw and a rubber surface. The two red Sliding Stoppers also stabilise the camera or lens when tilting the head or when working in portrait orientation. Thanks to the bracket, the 1/4 inch screw can be secured without the use of additional tools.SIRUI quick release plates are compatible with the Arca...

Sirui TY-LP40 Quick Release Plate With Belt Thread The TYLP quick release plates have a 1/4' internal thread, which allows the attachment on a camera strap. This allows you to work on a tripod without having to take the camera strap off.Ideal for straps from Sun-Sniper, Carry Speed, CUSTOMSLR, Black Rapid etc.The camera plate is attached to the camera and the strap in the 1/4' thread of the plateRubberised...

Sirui VH-90 Quick Release Base for Video System The VH-90 Quick Release Platform and Plate from Sirui gives you a quick release platform for your head, and the VP-125 plate for your video or DLSR camera. The plate has 1/4' and 3/8' mounting screws, so the plate will work with any equipment you have. Designed with a dual locking system, the platform allows you to unlock the plate and make adjustments,...

The P-306 is a super light, extremely compact and easy to handle monopod.  It consists of 6 sections and the working height ranges from 38cm to 155cm.  The leg diameters range from 16mm to 32mm and take a payload of 8kg.  Lightweight coming in at only 550g.  

Precision - The K-30X is a highly accurate and smooth ball head.  Strong - With a payload of 30kg, you camera will be safe and secure!.  Ergonomic - The locking knob is coated with a rubber grip for easy operation, even wearing thick gloves.  Arca Swiss - Compatible with the Arca Swiss System and allows the use of various compatible plates.  

Precise control - Three stage friction control for panning, plus a 0 position with no friction.  Safety Lock System - This prevents the plate from accidentally slipping.  Comfortable controls - The rubber covered handle, adjustable in length from 30cm to 47cm, can be mounted on the left or on the right side for ease of use.  4KG Payload - The VH-10X features a 4kg payload and a 2kg counterbalance.  Arca Swiss compatible - The VA-5 video heads are equipped with an Arca Swiss compatible release plate.  

The P-326 is a super light, extremely compact and easy to handle monopod.  It consists of 6 sections and the working height ranges from 39.2cm to 155cm.  The leg diameters range from 16mm to 32mm and take a payload of 8kg.  Lightweight coming in at only 550g.  

Built for travel and those who require a lightweight, compact but tall tripod.  Crafted from 8 layer carbon fibre aircraft grade aluminium.  Easy to carry around weighing in at under 1.2kg.  No need to compromise, go as low as 13cm or 140cm high.  The flip lock system allows for quick and easy setup.  Flip the legs over 180 degrees to fold it smaller than comparably sized tripods.  

Unique modular design - Four modules combined freely to form a monopod, an extension rod, or a tabletop tripod.  Great portability - 10 layer carbon fibre structure gives the P-424FL a weight of only 1.25 kg.  Quick Release System - Pull down the top/bottom quick release sleeve to detach modules in a quick and easy way.  36° Tilting - Loosen the ball locking knob and tilt the monopod 36° in any direction.  360° Panning - Unlock the upper twist collar to get a full 360°panning ability.  Full-Featured Tripod Foot - Legs can be folded up reversely to fit into your backpack.