Sony FA-WRC1M Wireless Radio Commander

Mount to a compatible camera, and pair with FA-WRR1 wireless radio receivers connected to compatible flashes to remotely control multiple lighting setups

Wireless remote commander for lighting freedom

Mount to a compatible camera, and pair with FA-WRR1 wireless radio receivers connected to compatible flashes to remotely control multiple lighting setups.

• Up to 30 m (98.4 ft) radio wireless range for reliable and precise control in any setting
• Controls up to 15 compatible flash units, and 5 groups, using wireless receivers
• Three exposure controls with convenient TTL (through-the-lens) metering, manual and group modes
• Built-in Sync Terminal
• Remote control multi-camera shutter release with FA-WRR1 wireless receivers and multi-terminal cables
• Communication: Radio
• Frequencies: 2.4 GHz band
• Channels: 14 (Auto/Manual selectable)
• Range: Approx. 30 metres
• Groups: 3 groups (TTL/Manual), 5 groups (Group)
• Flash Units: 15
• Operating Modes: Wireless Flash (TTL/Manual/Group), Remote Release
• Power Level Switching: 25 levels (1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256) 1/3 steps
• High-Speed sync (HSS): Available at all shutter speeds with Sony interchangeable-lens digital cameras that feature the Multi Interface Shoe
• Test Flash: Test button provided
• Multi Interface Foot: Yes
• Sync terminal: Yes (Output)
• Multi/Micro USB: Yes
• Compatible Cameras: Sony interchangeable-lens digital cameras
• Power source: Two AA-size alkaline or NiMH batteries (batteries not included)
• Operating time: Approx. 12 hours (with alkaline batteries)
• Operating Temperature Range: 0°C–40°C
• Dimensions: 5.8W x 6.58H x 8.37D cm
• Weight: 93 g (excluding batteries)

Easily control flashes through wireless radio receivers - Enjoy the confidence and flexibility of radio wireless flash and camera triggering, even in bright lighting conditions or around obstacles, making difficult shots and wide shooting areas (30 m) easier. The FA-WRC1M wireless radio commander, attached to compatible cameras. allows reliable triggering when combined with the FA-WRR1 wireless radio receiver.

Wireless capabilities that go the distance - The FA-WRC1M wireless radio commander and FA-WRR1 wireless radio receiver feature a maximum range of 30m (98.4ft) so you can flexibly create multiple wireless flash setups over an expansive area, including having the flash positioned behind the camera in a way that would be impossible with a conventional infrared system.

Effortless pairing with wireless radio receivers - Pairing multiple FA-WRR1 radio receivers to the FA-WRC1M wireless radio commander is designed to be quick, so you can spend less time setting up, and more time getting shots. Simply hold down the receiver power button for a few seconds to enter pairing mode, then add each receiver to the radio commander.

Convenient remote flash setting confirmation - Select from convenient through-the-lens (TTL) flash metering, manual, or up to 5 independent flash groups for functional light control. With centralised control using the FA-WRC1M wireless radio commander, lighting adjustment is quick and easy.

Remotely trigger multiple camera shutters - Use multiple cameras to simultaneously shoot subjects from different angles. Use VMC-MM1 Multi Terminal connecting cables (sold separately) to connect receivers to cameras, and the FA-WRC1M wireless radio commander to simultaneously trigger multiple remote camera shutters.

Flexible flash shooting modes - Combine multiple receivers (up to 15 receivers, within up to 5 groups) for accurate wireless transmissions. Easily control multiple flash units for more creative lighting options, with a minimum of equipment.

Fast sync speeds for creative shooting - Native 1/250 flash sync and High-Speed Sync (HSS) modes enable remote and multi-flash setups for even moving subjects and expressive fill-light use.

For multiple off-camera flash setups - Use with the FA-WRR1 wireless radio receivers for multiple off-camera flash setups

For remote release function - Use with VMC-MM1 Multi Terminal connecting cables for the remote release function